Rubinetterie Bresciane and the Bonomi Group will once again be exhibiting at Chillventa 2024, the largest international HVAC/R trade fair, which will be held in Nuremberg from 8 to 10 October and will bring together more than 30,000 visitors and 850 exhibitors from over 43 countries.

The Fra.Bo range includes a wide range of products that meet the most advanced requirements of the refrigeration, air-conditioning and ventilation market, guaranteeing reliability, efficiency and sustainability. Among the series on display in hall 5 stand 5-136 will be:

• FRABO 4000: characterised by fittings with bronze weld end, available in different sizes (from 6 to 108 mm) and compliant with UNI EN 1254-1 and threaded end manufactured following EN 10226-1.
• FRABO 5000OT: threaded fittings made of high-quality brass and available in the size range from 1/4’ to 3’ in compliance with EN 10226-1 and UNI EN 1254-4.
• FRABO G-SIZE: copper Cu-DHP soldered fittings designed and manufactured for soldered joints subject to high working pressure or severe mechanical stress. Size ranges from 22 to 133 mm.
• FRABO 5000: copper Cu-DHP soldered fittings available in several sizes (6 and 133 mm) and manufactured by the requirements of European standard UNI EN 1254-1.
• FRABO FRIO: copper Cu-DHP solder fittings in the 1/4' to 4’1/8 size range conforming to ASME B 16.22 and suitable for VRV-VRF air conditioning systems and industrial refrigeration applications.

During the event, Rubinetterie Bresciane will preview the new FRABO POLAR series: high-strength CuFe weld fittings designed for high-pressure refrigeration applications up to 130 bars. The FRABOPOLAR series of fittings are particularly suitable for CO₂ (R-744) in transcritical applications.

The FRABO POLAR series was developed to meet the growing need for components capable of withstanding the high operating pressures associated with CO₂ (R-744). Thanks to its low environmental impact (ODP of zero and GWP of one), making it a very environmentally friendly refrigerant, CO₂ (R-744) is increasingly being used in commercial refrigeration systems, particularly those for large-scale retail plants. FRABO POLAR fittings are perfect under these conditions as they guarantee high mechanical strength, safety and reliability.

The participation in Chillventa 2024 represents an important opportunity for Rubinetterie Bresciane to consolidate its leadership in the HVAC/R sector and to interact with the main global players in the market.

Bonomi Group will be exhibiting together with Rubinetterie Bresciane, Chibro, Ghibson, Valpres, Valbia, and Savinox from 3 to 6 September in Hamburg at SMM 2024, the world's leading trade fair for the maritime industry, which will bring together some 40,000 participants from over 120 countries.

At stand A1.405, Bonomi Group will exhibit a range of state-of-the-art products and solutions specifically designed for the marine industry, including:

• Ghibson centric butterfly valve model BLKI: maximum operating pressure 16 Bar, bronze-aluminium body and disc, NBR seat, and stainless steel stem. Designed to resist corrosion in marine environments, this valve is ideal for seawater applications. Operated by a Valbia single-acting R&P pneumatic actuator, with aluminium case and specific paint option to resist seawater corrosion.

• RB pressfittings TURBO CUNI and TURBO INOX: pressfittings and valves in cupronickel 90/10 and AISI 316 stainless steel, perfect for on-board applications. These components are essential for the distribution of flammable fluids, inert gases, sea and fresh water, sanitary applications, probes, vents and general piping, ensuring reliability and durability.
• TURBO DRAIN: made of AISI 316 with a push-fit connection is ideal for both vacuum and gravity drainage systems. It includes pipes and fittings from DN 40 to DN 200, A0-A60 certified sumps, and A0-A60 certified welded bridge/partitions. Also, on display will be HERMETIC, the A0-A60 certified deck/bulkhead pipe penetrations system, which is suitable for both pressfittings and push-fit systems, guaranteeing a safe and reliable seal.
• Split body flanged ball valve series 760N00: designed for marine applications with PN16 (DN>65) and PN40 (DN≤50), stainless steel body and components, PTFE seals and FKM fluoropolymer perox. ATEX and Fire Safe certified, available in sizes 1/2" to 8". Can be coupled with Valbia actuator model VB060M, conforming to RINA Type Approval and anti-shock certified, ensuring reliable performance in marine environments.
• Ghibson check valve model GH15: compatible with PN10-16-25 and ANSI 150 flanges, stainless steel body and disc, available in metal-to-metal or soft-seated versions (NBR, EPDM, FKM, PTFE) and gauge to EN558 series 49. Designed to withstand the most demanding marine conditions, with a maximum operating pressure of 25 bar it is ideal for fresh water and hydrocarbon applications.

Savinox, a Bonomi Group company and long-standing distributor in the marine industry, will be present to offer a wide range of products and services for both new construction and refitting. Savinox's presence guarantees comprehensive support for every naval project where fast delivery and impeccable service are required.

Innovative technologies, state-of-the-art solutions, and a wide and diversified 100% made in Italy product portfolio, designed to meet all the maritime sector's needs, allow the Bonomi Group to stand out as a reference point of competence and quality in the naval sector. Group synergies also allow to offer an unrivalled service, making every collaboration efficient and highly productive.

Discover all the Bonomi Group products, our staff will be pleased to welcome you and present all the solutions on display.